Поиск
Нажмите Enter для поиска

Центр продуктов

Высокоскоростная подметальная машина TS18

Объединяет функции подметания, сбора мусора, пылесоса и выдувания в одном устройстве.

Уборка автомагистралей является важнейшей частью управления сетью скоростных дорог. Контроль рисков для безопасности дорожного движения и поддержание высоких стандартов чистоты дорог являются основными задачами операций по уборке автомагистралей.


Традиционные подметальные машины в Китае обычно работают со скоростью всего около 20 км/ч. Такая низкая скорость на автомагистралях и городских скоростных трассах может легко создавать риск столкновений сзади, представляя значительную угрозу безопасности.


Компания Tianjia Intelligent, используя множество ключевых запатентованных технологий, самостоятельно разработала высокоскоростную подметальную машину TS18, способную работать на скорости до 60 км/ч. Она подходит для широкого спектра задач по уборке, включая автомагистрали, городские скоростные трассы и взлетно-посадочные полосы аэропортов. TS18 значительно повышает эффективность уборки дорог, эффективно снижает риски для безопасности, связанные с работой на низких скоростях, и всесторонне повышает как безопасность уборки, так и общую эффективность движения по дорожной сети.


The vehicle is built on a Class II commercial vehicle chassis manufactured by China National Heavy Duty Truck Group (SINOTRUK),
The vehicle is built on a Class II commercial vehicle chassis manufactured by China National Heavy Duty Truck Group (SINOTRUK),
with an engine that meets China VI emission standards. It integrates multiple functions, including air blowing, sweeping, wet dust suppression, and washing and sweeping. With an operating speed of over 60 km/h, it is capable of high-speed road cleaning operations and is widely used for cleaning expressways, urban ring roads, and other high-speed roadways.
(Optional) Foldable Front Magnetic Sweeping Device
(Optional) Foldable Front Magnetic Sweeping Device
(Optional) Foldable front-mounted magnetic pickup device with a maximum working width of up to 3,500 mm. It efficiently picks up ferrous debris that is difficult to completely remove through conventional sweeping or air-blowing operations, such as nails, iron filings, bolts, and nuts, ensuring thorough removal.
The vehicle is equipped with wire-and-nylon composite sweeping brushes on both sides,
The vehicle is equipped with wire-and-nylon composite sweeping brushes on both sides,
featuring high rotational speed and strong torque. With a maximum working width of 3.5 meters, the brushes provide wider cleaning coverage. As the brushes wear, hydraulic cylinders automatically adjust the pressure to maintain consistent bristle-to-ground pressure and contact area, ensuring stable and consistent cleaning performance.
The vehicle features a centrally mounted left-and-right air-blowing system with a maximum working width of no less than 12 meters.
The vehicle features a centrally mounted left-and-right air-blowing system with a maximum working width of no less than 12 meters.
Air outlet speeds can reach 120–130 m/s. The blowing direction, height, angle, and outlet size are all adjustable, providing multi-angle and multi-directional control to meet the requirements of different operating conditions. The central air-blowing system typically operates independently. When the road surface contains large amounts of fine sand and gravel that are difficult to remove with conventional sweeping equipment, direct air blowing from the fan delivers optimal cleaning results.
The rear-mounted high-speed sweeping module adopts a high-speed roller sweeping,
The rear-mounted high-speed sweeping module adopts a high-speed roller sweeping,
full-width collection, and full-width high-power suction configuration, with a sweeping width of 2,300 mm. The integrated horizontal roller brush can reach a maximum operating speed of 1,200 rpm. Even heavy debris on the road surface can be effectively collected, ensuring consistent cleaning performance and fully meeting the requirements of high-speed operations at speeds exceeding 60 km/h.
Single-Engine Power for Improved Energy Efficiency
Single-Engine Power for Improved Energy Efficiency
The vehicle features Tianjia’s self-developed single-engine control system, using the chassis engine as the sole power source for all cleaning operations. With no auxiliary engine, there are no additional auxiliary-engine exhaust emissions, while the vehicle meets China VI emission standards. The intelligent system automatically switches between operating modes according to actual requirements, reducing unnecessary power consumption. Compared with dual-engine models, fuel consumption is reduced by more than 15%. By eliminating the entire auxiliary engine system, the vehicle has fewer potential failure points, resulting in lower maintenance costs and easier inspection and servicing.
3+1” Dust Suppression for Near-Zero Dust Emissions
3+1” Dust Suppression for Near-Zero Dust Emissions
Water mist nozzles are installed at the front of the suction-sweeping unit, as well as at the inlet and outlet of each suction pipe. This effectively moistens dust and debris particles in the airflow, preventing dust from becoming airborne. The curved rotary duct design facilitates efficient separation of debris from air, allowing clean air to be discharged back into the atmosphere and minimizing secondary dust emissions.
Extended Operating Range for Continuous High-Efficiency Cleaning
Extended Operating Range for Continuous High-Efficiency Cleaning
The vehicle offers extended continuous operating capability, with a waste hopper capacity of over 7,500 L and a maximum operating speed of 60 km/h. The large-capacity hopper reduces the frequency of unloading trips, effectively extending the continuous operating range and significantly improving cleaning efficiency. It also minimizes the time spent occupying highway lanes during cleaning operations, helping maintain normal traffic flow and road access.
The TIEC ZPAD intelligent control system integrates the operation of the entire vehicle
The TIEC ZPAD intelligent control system integrates the operation of the entire vehicle
allowing the working mechanisms to be started and stopped with one touch from the cab, making operation simple and effortless. The stainless-steel frameless waste hopper has a large unloading angle, leaving less residual material and ensuring clean unloading. The vehicle is equipped with a high-pressure self-cleaning system, which cleans the hopper and vehicle body at the end of operation, suppresses the growth of odors, and keeps the entire vehicle clean and tidy.

Технические характеристики

Parameter Name
Parameter Value
Product Category
Highway Sweeper
Product Model
TS18
Announcement Model
JTJ5180TSLZ6
Overall Dimensions (L×W×H)
8430（8860）×2550×3200
Curb Weight
13100
Maximum Gross Weight
18000
Parameter Name
Parameter Value
Chassis Model
Sinotruk ZZ1187N501GF1
Wheelbase (mm)
5000
Engine Model
MC07H.35P-61
Engine Rated Power
258kW
Maximum Speed (km/h)
89
Tire Model
10.00R20 18PR
Parameter Name
Parameter Value
Sweeping Width (m)
3.5
Drive Type
Hydraulic Motor
Parameter Name
Parameter Value
Blowing Width (m)
≥12
Maximum Wind Speed (m/s)
120
Parameter Name
Parameter Value
Max Working Width (m)
2.3
Number of Suction Hoses
3
Suction Hose Diameter (mm)
220
Operating Speed (km/h)
≥60
Parameter Name
Parameter Value
Clean Water Tank Capacity (m³)
≥4, 6 Optional
Debris Hopper Capacity (m³)
≥7.5
Angle of Discharge
45°

Рекомендованная история успеха

Since its launch in 2022, the TS18 High-Speed Sweeper has been deployed at numerous hub and regional airports, including Guilin Liangjiang International Airport, Xichang Qingshan Airport, Nanning Wuxu International Airport, Yantai International Airport, Ulanhot Airport, and Hohhot New Airport, covering multiple regions across South China, Southwest China, East China, Northeast China, and North China. The vehicle was independently developed by Tianjia Intelligent based on multiple core patented technologies. With an operating speed of up to 60 km/h, it overcomes the low-speed limitation of traditional conventional sweepers in China, which typically operate at only around 20 km/h. It is suitable for cleaning operations across various airport areas, including runways, taxiways, and aprons, significantly improving airfield cleaning efficiency while effectively mitigating the rear-end collision risks that can easily occur during low-speed operations in high-speed traffic environments. It comprehensively enhances the safety and operational efficiency of airport airfield cleaning operations.
Guilin Liangjiang International Airport
Since entering the highway cleaning sector in 2024, the TS18 High-Speed Sweeper has been deployed on multiple major expressways, including the Sanming Expressway in Fujian, the Fuzhou–Luochang Expressway, the Jiefubang Expressway and Ma'anshan Expressway operated by Anhui Transportation Control, covering multiple provinces across East and Central China. The vehicle was independently developed by Tianjia Intelligent based on multiple core patented technologies. With an operating speed of up to 60 km/h, it overcomes the low-speed limitation of traditional conventional sweepers in China, which typically operate at only around 20 km/h. It is suitable for cleaning operations across various scenarios, including expressways and urban expressways, significantly improving road cleaning efficiency while effectively mitigating the rear-end collision risks that can easily occur during low-speed operations on expressways. It comprehensively enhances the safety of road cleaning operations and the traffic efficiency of the road network.
Expressway
In 2026, the TS18 High-Speed Sweeper was successfully exported to Russia, officially entering the international market. Russia has long, harsh winters, placing extremely high demands on the environmental adaptability of airfield cleaning equipment. This export fully demonstrates the reliability and adaptability of the TS18 under extreme climatic conditions, highlighting the international technical competitiveness of Tianjia Intelligent Equipment.
Export to Russia
Крах
Центр продуктов
Все
Следите за нашими пресс-релизами, чтобы быть в курсе обновлений продукции и новостей.
код проверки Не может быть пустым
Круглосуточная горячая линия службы поддержки.
+86-0514-86619909
Круглосуточная горячая линия службы поддержки.
Вейбо qq ссылки

Авторские права © 2026 Цзянсу ТИЕК Акционерное общество производства интеллектуального оборудования

Техническая поддержка:Сеть Ximi

Карта сайта
chat

Онлайн-служба поддержки клиентов

×

Этот веб-сайт использует файлы cookie, чтобы обеспечить вам максимально эффективное использование нашего веб-сайта.

Принимать отклонять